678319
112
Zoom out
Zoom in
Previous page
1/117
Next page
This recovery procedure erases your data. Backing up regularly is highly recommended to avoid losing your
important data.
Do not connect the SD card to another TeraStation or your computer. The recovery process that involves using this
SD card is intended for this product only.
Recovery is performed by deleting the area for drive 1, setting up a new 100 GB (Basic Disk/Simple) area, and
then copying the Windows Storage Server image to this area.
Note: If there are system areas (or mirrored locations) on hard drives other than drive 1, be sure to delete
the system areas (or disable the mirrored locations) before performing the recovery procedure. If recovery is
performed without deleting these areas, Windows Storage Server may not run after recovery is performed.
If Windows Storage Server fails to run, turn off the TeraStation and perform the recovery procedure again
while all hard drives except for drive 1 (disk 0) are disconnected. After recovery is complete, reconnect the
disconnected drives, which will appear in “Disk Management as “Foreign. In “Disk Management, right-click
Foreign, select Import Foreign Disks, then right-click this area and click Reactivate Volume to rebuild the RAID
volume.
1 Turn off the TeraStation, following the procedure on the Turning the TeraStation On and Off section in
chapter 1.
2 Insert the SD card into the card reader (not included).
3 Connect the card reader to the TeraStation using a USB 3.0 or 2.0 port.
4 Set the boot mode switch to “USB, then press the power button.
This executes the recovery process.
5 The TeraStation shuts down automatically when the recovery process is complete.
6 Remove the card reader, set the boot mode switch to “HDD”, and press the power button.
When the initial setup is complete, the TeraStation will reboot into Windows Storage Server.
After the recovery process is completed, the TeraStation is set to the state below when running under default
settings.
• Drive 1
100 MB (EFI System partition)
100 GB (Basic Disk/Simple)
The remaining space is an unallocated area.
• Drives 2–6
The data on the drives cannot be viewed. They appear as a “Foreign in “Disk Management”.
Note: The data on the drives can be viewed by right-clicking the area displayed as “Foreign in “Disk Management”
and then selecting Import Foreign Disks.
Notes
Using an Omron UPS
The TeraStations LCD panel will not display information correctly when an Omron UPS is first connected. This is be-
cause the LCD panel control and the Omron UPS both use COM port 2. To resolve, refer to the Omrons user manual
and change its UPS communication port to a port other than COM 2, then restart the TeraStation.
111
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation WS5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation WS5400 in the language / languages: English as an attachment in your email.

The manual is 7,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buffalo TeraStation WS5400

Buffalo TeraStation WS5400 User Manual - German - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info