678317
143
Zoom out
Zoom in
Previous page
1/160
Next page
143
Trunking Mode Characteristics
XOR
*
Transmits network packets based on [(source MAC
address XOR’d with destination MAC address) modulo
NIC slave count]. This selects the same NIC slave for each
destination MAC address.
Broadcast
Transmits network packets on all slave network
interfaces.
Dynamic link aggregation
**
Creates aggregation groups that share the network
speed and duplex settings. Utilizes all slave network
interfaces in the active aggregator group according to
the 802.3ad specification.
TLB
The outgoing network packets traffic is distributed
according to the current load (relative to the speed) on
each network interface slave.
ALB Includes both balance-tlb and rlb by ARP negotiation.
*A separate intelligent switch that supports EtherChannel or other port trunking is required. Configure the LAN ports on
the switch for port trunking first.
**A separate intelligent switch that supports IEEE 802.3ad is required. Configure LACP in the switch first.
Configuring Port Trunking
1 Use an Ethernet cable to connect the TeraStations LAN port 1 to a LAN port on the hub.
Notes:
Port trunking is not supported with ports on expansion cards.
AFP connection will not be possible if port trunking is enabled. If using port trunking, connect to shares with SMB
or FTP instead.
If the TeraStation is being used as an iSCSI hard drive, disable iSCSI before changing network settings such as port
trunking. Navigate to Drives - iSCSI in Settings and move the iSCSI switch to the position temporarily.
Do not connect the second Ethernet cable to the TeraStation yet.
If using an intelligent switch, configure the LAN ports on the switch first, before connecting to the TeraStation.
2 In Settings, click Network.
3 Click to the right of “Port Trunking”.
4 Choose which ports will be trunked.
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation 7120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation 7120 in the language / languages: English as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info