678317
135
Zoom out
Zoom in
Previous page
1/160
Next page
135
5 Select Transfer settings from a USB drive, then click Execute.
Recovering the TeraStation
Creating a Recovery Drive
A recovery drive can let you recover your TeraStation even if it will not boot at all. It lets you completely reinstall the
operating system. While your TeraStation is working perfectly, create a recovery drive in case something goes wrong
later. Follow the steps below to create a recovery drive for the TeraStation.
Note: Although making the recovery drive as described below will not effect your settings or data, if you ever have
to use it to recover the TeraStation, all data and settings from the TeraStation will be erased. Back up your data and
settings regularly!
1 Insert a 1 GB or larger USB flash drive into a USB port on the TeraStation.
Note: All data on the USB flash drive will be erased!
2 In Settings, navigate to Management - Restore/Erase - USB Options.
3 Select “Create a USB drive for system recovery”.
4 Select the USB drive connected to the TeraStation from Target USB drive, then click Execute. Enter the 4 digit
confirmation number and click OK. The TeraStation will create the recovery drive. This will take about a minute.
5 When the “finished” dialog opens, the USB recovery drive is ready to use. Dismount the USB drive before
unplugging it. See “Dismounting Drives” in chapter 4 for the instruction to dismount your USB drive.
Note: If your TeraStation will not boot, it’s too late to create the recovery drive from within its software! Instead,
download the recovery image from www.buffalotech.com and use disk image software such as dd or Win32 Disk
Imager to image a 1 GB or larger USB flash drive with the downloaded file.
Recovering the TeraStation
If your TeraStation will not boot at all, you can completely reinstall the operating system.
Warning:
Recovering the TeraStation will erase all data and settings from the TeraStation. Back up your data and settings regularly!
To recover the TeraStation, follow the procedure below.
1 Insert the USB recovery drive into a USB port on the TeraStation.
2 Create a USB “recovery drive” as described above.
135


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation 7120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation 7120 in the language / languages: English as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info