678317
58
Zoom out
Zoom in
Previous page
1/160
Next page
58
Do not change the order of the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it
with drive 2 may cause data to be corrupted or lost.
If a new drive is not recognized, click Rediscover Disk in Settings.
If two drives fail at the same time, replace and resync them one at a time.
Hard Drive Replacement Examples
Drive Replacement (using a redundant RAID mode such as RAID 1, 5, or 6 with auto-
shutdown disabled)
This section describes replacing a drive with the TeraStation on.
1 The failed drives status LED will be glowing red. Push its unlock button and swing the lock mechanism out.
2 Pull out the drive cartridge and remove it from the TeraStation.
3 Insert the new drive in the empty slot. Slide the drive in with the locking mechanism open.
4 Swing the lock back down until it clicks into place.
5 When the replacement hard drive is recognized, the status LED will flash red. The TeraStation will start rebuilding
the RAID array automatically.
Drive Replacement (using a redundant RAID mode such as RAID 1, 5, or 6 with auto-
shutdown enabled)
This section describes the process of replacing a drive while the TeraStation is off.
1 Push the unlock button of the failed hard drive and swing the lock mechanism out.
2 Pull out the drive cartridge and remove it from the TeraStation.
3 Insert the new hard drive in the empty slot. Slide the drive in with the locking mechanism open. Swing the lock
back down until it clicks into place.
4 Press the power button on the TeraStation.
5 When the replacement hard drive is recognized, the status LED will flash red.
6 The TeraStation will start rebuilding the RAID array automatically.
Drive Replacement (RAID 0 or JBOD)
Drives in a RAID 0 array or JBOD mode do not automatically turn off in the event of a malfunction. Before replacing the
failed drive, either dismount the drive from Settings, or shut down the TeraStation. This section describes the process of
replacing a drive with the TeraStation on.
1 In Settings, navigate to Drives - Drives.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation 7120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation 7120 in the language / languages: English as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info