678317
51
Zoom out
Zoom in
Previous page
1/160
Next page
51
Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows Server 2008, Windows Server 2012
If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows Server 2008, or Windows Server 2012, the
Microsoft iSCSI Software Initiator is already installed on your computer. You don’t need to download and install it.
iSCSI Setup
To use the TeraStation as an iSCSI hard drive, configure it as described below.
1 Connect the TeraStation’s Ethernet and power cables and configure the TeraStations IP address and its clock.
2 In Settings, click Drives.
3 Choose LVM.
4 Select the drive where the volume will be created and click Enable LVM on Volume.
Notes:
Enabling LVM before using a drive as an iSCSI drive is optional. If LVM is not enabled, you can still create one iSCSI
volume from the entire drive. However, enabling LVM is recommended for drives that will be used for iSCSI.
If the LVM settings are changed, all data on the volume will be erased. Before changing the settings, back up any
important data.
5 The “Confirm Operation screen will open. Enter the displayed number, then click OK.
6 Click OK.
7 Move the iSCSI switch to the position to enable iSCSI.
8 Click to the right of “iSCSI”.
9 Click Create Volume.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation 7120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation 7120 in the language / languages: English as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info