678309
202
Zoom out
Zoom in
Previous page
1/224
Next page
201
Chapter 8 Drive Replacement
2 The failed drive’s status LED will be glowing red. Push its unlock button and swing the lock mechanism out.
3 Pull out the drive cartridge and remove it from the TeraStation.
4 Insert the new drive into the empty slot. Slide the drive in with the locking mechanism open.
5 Swing the lock back down until it clicks into place.
6 Close the front cover.
7 Press the power button on the TeraStation.
8 When the replaced drive is recognized, the status LED will flash red and the I31 message will appear in Settings
or NAS Navigator2.
9 Press the function button on the front of the TeraStation. The TeraStation will beep. If replacing multiple
malfunctioning drives at once, select the replaced drives on Settings and click Recover RAID Array.
10 The TeraStation will start rebuilding the RAID array automatically. It will take about five minutes before the I18
message is displayed.
Using RAID 0
Drives in a RAID 0 array do not automatically turn off in the event of a malfunction. Shut down the TeraStation
before replacing the failed drive.
This section describes the process of replacing a drive with the TeraStation off.
Note: If a drive malfunctions in RAID 0, all data on the RAID array will be lost. All of the settings for the shared folders
(such as access restrictions) are erased after replacing a drive from a RAID 0 array.
1 Turn off the TeraStation.
2 Open the front cover with the included key.
3 The failed drive’s status LED will be blinking red. Push its unlock button and swing the lock mechanism out.
4 Pull out the drive cartridge and remove it from the TeraStation.
5 Insert the new drive into the empty slot. Slide the drive in with the locking mechanism open.
6 Swing the lock back down until it clicks into place.
7 Close the front cover.
8 Press the power button on the TeraStation.
9 When the replaced drive is recognized, the status LED will flash red and the I32 message will appear in Settings
or NAS Navigator2.
10 From Settings, click Storage.
11 Click to the right of “RAID”.
12 Select the RAID array for which the failed drive was being used and click Delete RAID Array.
202


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation 3010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation 3010 in the language / languages: English as an attachment in your email.

The manual is 9,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buffalo TeraStation 3010

Buffalo TeraStation 3010 User Manual - German - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info