678307
109
Zoom out
Zoom in
Previous page
1/136
Next page
2 Connect the USB drive with the saved settings into a USB 2.0 port (not a USB 3.0 port) on the TeraStation.
3 While holding down the init button on the back of the TeraStation, press the power button.
4 Hold down the init button until the function LED glows. When it glows, let go of the button.
5 When the TeraStation is ready, the I41 message will be displayed in NAS Navigator2. For TS1400D models, the
power LED will start blinking red. For TS1400R models, the error LED will start blinking red.
6 Hold down the function button until the TeraStation beeps. Applying settings will start.
7 It will take several minutes for the settings to apply. When finished, the TeraStation will shut down.
8 Remove the USB drive, then power on the TeraStation.
Restoring Factory Defaults
There are two ways to initialize the TeraStation. Follow one of the procedures below.
Initializing with Function Button
If you forget the admin username or password, or wrong IP address was configured accidentally, follow the
procedure below to initialize these settings.
Notes:
• The following settings will be initialized: admin username, admin password, IP address, and Ethernet frame size.
• To disable initializing the admin username and password, navigate to Management - Restore/Erase - Edit and
change “Restore factory default settings” to “Keep current settings”. Be careful with this option! If this is selected
and you lose your admin password, you will not be able to reset it.
1 Turn off the TeraStation.
2 Turn the TeraStation on while holding down the function button. The function LED will flash.
3 Press the function button again while the LED is flashing.
4 Initialization will take 5 to 10 minutes. Do not power down the TeraStation while it is initializing and showing
an I23 information message in NAS Navigator2 and with the power LED. When initialization is finished, reboot
your TeraStation.
Initializing from Settings
To initialize the TeraStation to its factory defaults from Settings, follow this procedure.
1 In Settings, click Management.
2 Click to the right of “Restore/Erase.
108
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation 1200 in the language / languages: English as an attachment in your email.

The manual is 6,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buffalo TeraStation 1200

Buffalo TeraStation 1200 User Manual - German - 139 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info