678306
41
Zoom out
Zoom in
Previous page
1/141
Next page
7 Select a RAID mode and click Next.
8 Click Yes.
9 RAID array creation will start. Wait until its done. When its finished, click OK, then Close.
Once the RAID array is configured, create shared folders on the array to use them. Refer to the “Folder Setup section
in chapter 7 for the procedure.
Expanding RAID Array Capacity
If the drives in your LinkStation are in a RAID 1 array with two drives or they are in degraded mode, you can expand
the RAID array capacity without erasing the data on the drives. To expand the capacity, you should have two new
drives with capacity larger than the remaining drive.
1 Shut down the LinkStation and remove one of the drives. Do not remove both drives at the same time.
2 Insert a new drive (larger capacity than the remaining drive) and turn on the LinkStation.
3 When the power LED glows white or blinks amber, press and hold the function button on the back of the
LinkStation for 5 seconds.
4 The LinkStation will start rebuilding the RAID array. After a few minutes, the I18 message will be displayed in
NAS Navigator2. Wait until the drive finishes rebuilding; the I18 message will be extinguished.
5 After the RAID array is rebuilt, shut down the LinkStation again and remove another drive.
6 Insert another new drive and turn it on.
7 When the power LED blinks amber, press and hold the function button on the back of the LinkStation for 5
seconds.
8 The LinkStation will start rebuilding the RAID array again. Wait until the I18 message is extinguished like step 4
above.
9 After the I18 message disappears, open Settings and click Disk Manager ( ).
40
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo LinkStation 520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo LinkStation 520 in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buffalo LinkStation 520

Buffalo LinkStation 520 User Manual - German - 147 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info