678298

Buffalo LinkStation 200 - LS210D-EU Manual

39
Zoom out
Zoom in
Previous page
1/127
Next page
13 Click OK.
Notes:
• If you change the LinkStation’s name, you will no longer be able to use domain users and groups or access
restrictions. To repair this, rejoin the domain.
• If both read-only and read and write permissions are given to a user, the user will have read-only access. The most
restrictive attribute will apply.
• If a domain username is more than 20 bytes long, the LinkStation truncates it to 20 bytes.
• To use the LinkStation as a member server in an NT domain, the LinkStation should be logged in to the domain
and accessed from a computer that is not a member of the domain with a valid domain account.
• If the LinkStation is a member server of an NT domain, you cannot connect as a guest user via AFP.
• When you change the user or group settings on the domain controller, these changes may not take effect
immediately on the LinkStation until it is rebooted.
• If your LinkStation is a member server in an NT domain and you change the external authentication method to
“Workgroup”, the account on the domain controller will not be deleted automatically.
• If the LinkStation has joined a domain network, you cannot connect to it via FTP.
• Don’t disable the SMB protocol while an NT domain server is used for access restrictions. If you do, you will need
to enable SMB again and reconfigure the NT domain settings from scratch.
User Authentication with an External SMB Server
LinkStations on your network can be linked to an authentication server for centralized management of user
accounts and passwords. The authentication server should be another Buffalo NAS device. Other external SMB
authentication servers are not supported.
Notes:
• Disable SMB2 before using external authentication.
• Access restrictions for local users and groups will still apply to shared folders if an external SMB server is used for
authentication.
• The procedure below contains methods to automatically register external users. You can also manually add
external users by converting them from local users. Refer to the “Converting Local Users into External Users”
section below for more details on converting local users.
1 From Advanced Settings, click Network.
2 Click to the right of “Workgroup/Domain”.
3 Click Edit.
38
Chapter 3 File Sharing
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo LinkStation 200 - LS210D-EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo LinkStation 200 - LS210D-EU in the language / languages: English as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buffalo LinkStation 200 - LS210D-EU

Buffalo LinkStation 200 - LS210D-EU User Manual - German - 134 pages

Buffalo LinkStation 200 - LS210D-EU User Manual - Dutch - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info