678407
39
Zoom out
Zoom in
Previous page
1/76
Next page
34
ES
Línea de asistencia telefónica : 901-100 133 (España)
5. Retirar la cesta del aceite cuando el alimento está cocido. Agitarla suavemente sobre el recipiente del
aceite para eliminar el exceso de aceite.
Reinicio del corte térmico
Las Freidoras Buffalo tienen montado un dispositivo de seguridad de
Corte Térmico. Si la temperatura supera los límites de seguridad el
aparato cortará automáticamente la alimentación.
Para reiniciar el aparato después de un periodo de enfriamiento suficiente:
1. Destornillar la tapa del interruptor de reinicio de corte térmico.
2. Pulsar el pequeño interruptor de reinicio hacia abajo hasta que
haga clic, utilizando un instrumento de punta roma.
3. El aparato está ahora reiniciado y puede utilizarse normalmente.
Limpieza, Cuidado y Mantenimiento
Desconecte el aparato y desenchúfelo del suministro eléctrico siempre antes de llevar a cabo la limpieza.
Antes de la limpieza siempre debe dejarse enfriar el aceite, óptimamente durante 6 horas.
Comprobar la temperatura con un termómetro de pruebas.; 40 ºC es la temperatura MÁXIMA a la que
debe eliminarse el aceite.
Para un mejor rendimiento, BUFFALO recomienda limpiar el aparato después de cada día de utilización.
Quitar el Panel de Control / Cuerpo para facilitar la limpieza.
Vaciar el aceite para limpiar el aparato cuidadosamente.
Si el aceite va a ser reutilizado, el filtrado del aceite antes de volver a llenar el recipiente alargará la
vida de cocción del aceite.
Utilizar un detergente adecuado para limpiar el interior del aparato.
Utilice agua jabonosa caliente y un paño húmedo para limpiar el exterior del aparato.
Secar a fondo después de la limpieza; asegurar que no quede agua en la freidora.
Un agente de BUFFALO o un técnico cualificado deberían llevar a cabo las reparaciones en caso de
precisarse.
ADVERTENCIA: ¡El alimento y el aceite esn muy calientes! Tener cuidado al retirar la
cesta ya que el aceite puede gotear.
Nota: La falta de limpieza regular del aparato puede provocar una activación prematura
del interruptor de corte térmico.
Nota: Las freidoras L300/L301 vienen con un tapón situado en la parte delantera para
vaciar el aceite del aparato. Para los demás modelos, utilizar un recipiente adecuado
para vaciar el aceite.
ADVERTENCIA: NO quitar la rejilla del aceite hasta DESPUÉS de vaciarla.
Nota: Sólo para los modelos L300/L301 - Al volver a llenar hay que asegurar que el
tapón esté en la posición de CERRADO.
Interruptor
de reinicio
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo L484 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo L484 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info