678402

Buffalo GK640-E Manual

206
Zoom out
Zoom in
Previous page
1/224
Next page
English - 14
Multi-stage cooking
1. Select the desired power level by pressing the POWER
LEVEL SELECTOR button or DEFROST SELECTOR
button.
Result : The selected power level will be displayed in the
display window.
2. Set the desired heating time by pressing the NUMBER
buttons.
Result : The selected time is displayed in the display
window.
3. Repeat steps 1 and 2 for II or III stage memory
programming.
4. Press the START button.
Result : The oven lamp and cooling fan will be turned
on. The oven will automatically start heating
according to pre-programed cooking time and
power level. (I stage
J
II stage
J
III stage).
The time on digital display will count down.
The maximum time according to each cooking power level can be referred to in the
title “Power Levels and Time Variations” on page 15. The NUMBER buttons will not
operate or respond when you press a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time allowed on
the chosen program. It is advisable to press CANCEL button and to enter a new
power level and cooking time.
You can not set up the same POWER LEVEL or DEFROST.
It operates as setting up sequence.
When all time is elapsed, the end of cycle Beep Tone will sound 4 times and all
heating will stop.
The oven lamp will go o. For 1 min, the display shows ‘0‘ and the cooling fan
will keep working in order to cool down the interior parts. During the time, the fan
will not stop even when you open the door. 1 min later it will stop. Food may be
removed from oven whilst the fan is still running.
During the time, the fan will not stop even when you open the door. 1 min later it will
stop and “ON” appears again. Food may be removed from oven whilst the fan is still
running.
Whilst in a heating cycle, one press on CANCEL button stops the oven. At this time,
the Power Check Indicator “ON” starts blinking and goes o when the CANCEL
button or START button is pressed again.
You can restart it by pressing the START button or a second press on CANCEL
button will cancel the selected program. While NOT in a heating cycle, one tap on
CANCEL button cancels the selected program.
You can press +20s button one or more times in order to add the cooking time by
20 seconds. But you can not exceed the maximum time per power level allowed for
power level selected.
When you first plug in the power cord, the oven beeps once and all the indicators
show for 5 sec in the display window.
When heating cycle is completed and you open the door, the oven lamp
automatically turns on and goes o 1 min later.
When you open the door whilst in a heating cycle, the oven stops operating and the
oven lamp automatically turns on for 1 min and goes o 1 min later. If you leave the
oven door open for more than 1 min, the oven beeps once every minute and after 5
min the power source check indicator ‘ON’ appears in the display window.
GK640-E_GK641-E_XEU_DE68-04279B-01_EN.indd 14 2014-06-27  6:49:48
… 206 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo GK640-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo GK640-E in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info