678419
46
Zoom out
Zoom in
Previous page
1/93
Next page
DiffServ Policy
Select the action for when the frames satisfy the condition.
Permit
Permits forwarding the frames and packets.
Deny
Discards the frames and packets.
Egress Queue
Changes the processing priority of the frames and packets.
Remark CoS
Rewrites CoS value of the frames and packets.
Remark DSCP
Rewrites DSCP value of the frames and packets.
Remark IP Precedence
Rewrites IP precedence value of the frames and packets.
Profile Action
Processes the frames and packets depending on the committed rate. If the rate
of the frames and packets is less than the committed rate, the switch will process
the frames and packets in accordance with the in-profile action. Otherwise, the
switch will process the frames and packets in accordance with the out-of-profile
action.
Committed Rate
Specify the rate to determine the process method.
Committed Burst
Specify the burst size that the switch processes in accordance with the in-
profile action when the rate of frames and packets exceeds the committed rate
instantaneously. When the burst size exceeds the committed burst, the switch
will process in accordance with the out-of-profile action.
In-Profile Action
Specify the action when the rate of frames and packets is less than the committed
rate.
Out-of-profile Action
Specify the action when the rate of frames and packets exceeds the committed
rate.
About Address and Mask
This product adopts “wildcard masks”. To configure the source IPv6 address or destination IPv6 address, refer to the
following example.
To specify the range of “2001:db8::” to “2001:db8::ffff
Enter “2001:db8::” in the address field and also enter “::ffff in the mask field.
To specify only “2001:db8::”
Enter “2001:db8::” in the address field and also enter “::” in the mask field.
45
Chapter 2 Settings
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo BS-GS2024P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo BS-GS2024P in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info