678368
71
Zoom out
Zoom in
Previous page
1/93
Next page
Loop Prevention
Configure loop prevention functionality.
Action
Configure the switch’s action when a loop is detected.
Ignore
When a loop is detected, the switch will do nothing for the port itself; the diag
LED and loop-detected ports LED will blink for the time configured in [Disable
for] section. If a loop is detected again, it will blink and continue until the loop is
resolved.
Disable port
The switch will disable the loop-detected port for the time configured in [Disable
for] section. At the same time, the diag LED and loop-detected port’s LED will
blink for the time configured in [Disable for] section. If a loop is detected again
after the time configured in [Disable for] section is passed, the switch will disable
the loop-detected port and continue until the loop is resolved.
Disable for
Configure the period to disable the loop-detected port when [Disable port] is
selected as the action.
MAC Thrashing
Check to enable MAC thrashing loop detection method, which assumes that a
loop occurs when the switchs MAC address learn limit exceeds the configured
threshold in one second.
LDF
Check to enable LDF loop detection method. The switch will transmit the LDF
packet once per second. If the transmitted LDF packet is received, this will
assume that a loop is occurring.
Note: LDF cannot be used when MSTP is enabled.
Receive Rate
Check to enable receive rate loop detection method. If the ports threshold
exceeds the configured receive rate, this will assume that a loop is occurring.
Received Data Threshold
Configure the threshold to assume that a loop is occurring. (1-1000 Mbps)
Note: If the received data threshold value is higher than the ingress bandwidth
value on the Traffic Control” page, the switch may not be able to detect a loop.
Note: The loop prevention functionality temporarily disables the port, but will not resolve the loop itself. On
the other hand, the spanning tree functionality blocks the port when a loop is detected and switches the route
automatically to prevent the network from going down. This switch has both functions; use the most appropriate
one depending on your network environment.
70
Chapter 2 Settings
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo BS-GS2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo BS-GS2024 in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info