678418
81
Zoom out
Zoom in
Previous page
1/93
Next page
Chapter 3 Troubleshooting
LED Is Not Lit, Abnormal Lighting or Blinking
The power LED is not lit. Confirm that the AC adapter or power cable is connected to the inlet.
The diag LED is blinking red.
If it blinks once per a second, a loop is detected. Check the cabling.
If your switch has fans and its diag LED is blinking fast, a fan error may be
occurring. Disconnect the power cable and reconnect it. If the LED keeps
blinking, contact our technical support.
The link/act LED is not lit.
Confirm that the Ethernet cable is connected to both the switch and the
device.
Confirm that the switch and the connected device are both powered on.
Confirm that the Ethernet cable type and length is compatible with the
switch.
Cannot initialize with the
reset button on the switch
Confirm whether the physical reset button is enabled in Settings.
If the physical reset button is disabled and you forgot the password of
Settings, contact our technical support.
Cannot Access Settings
Make sure that your PC is connected to the switch.
Access Settings with the switchs IP address (192.168.1.254 by default).
Confirm that the username (“admin by default) and the password (“password” by default) are correct. If you
forgot the username or password, initialize the switch.
If a proxy server is configured for the web browser, disable the proxy server or add the switch’s IP address to the
proxy servers exception list.
Confirm that your PC is connected to the port which belongs to the management VLAN.
Forgot the Password
The password is “password” by default. If you changed the password, press the reset button to initialize.
If the physical reset button is disabled and you forgot the password of Settings, contact our technical support.
80
Chapter 3 Troubleshooting
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo BS-GS2016P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo BS-GS2016P in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info