678367
73
Zoom out
Zoom in
Previous page
1/93
Next page
Update Firmware
Update firmware with the local firmware file.
Select a file image to update and click [Browse] to select the firmware image, then click [Update].
Notes:
Do not turn off the switch or close the browser while updating.
To finish the update, reboot the switch.
If changing the firmware to version 1.0.3.32 or earlier, the Settings username and password may also be changed
unintentionally. For more detailed information, refer to the “Restrictions” section in appendix A.
File Image Select a file image to update.
Dual Image
The switch can save up to 2 firmware files and can be configured to choose one for booting.
Image Name Select an image to change the action.
Action
Select the action for the image selected on “Image Name.
Active
Reads the image when the switch boots.
This setting will be applied after clicking [Apply] and rebooting the switch.
None
The image will not be used.
This setting will be applied after clicking [Apply] and rebooting the switch.
Delete
Select [Delete] and click [Apply] to delete the image.
The image will be deleted without having to reboot the switch.
Image Description
Enter the images description. You may enter up to 50 alphanumeric characters.
Note: The image description will never be initialized even if the switch is
initialized.
72
Chapter 2 Settings
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo BS-GS2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo BS-GS2016 in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info