678367
65
Zoom out
Zoom in
Previous page
1/93
Next page
The following screen is displayed when [Show Detail] is clicked. Up to 10 rules can be configured per group.
ACL Rule List Displays the list of rules in the ACL group. Rules are listed in order of the priority.
Move Rule
Select a rule and enter the rule number that the selected rule moves to before (or
after). Select [Before] or [After] and click [Move] to move the priority of the rule.
ACL Group Name Displays the selected ACL group name.
CoS Configure the filtering rule based on the frame’s class of service value.
Destination MAC Address
Configure the filtering rule based on the frame’s destination MAC address. For
instructions on how to enter the address, refer to About Address and Mask
section below.
Source MAC Address
Configure the filtering rule based on the frame’s source MAC address. For
instructions on how to enter the address, refer to About Address and Mask
section below.
Ether Type Configure the filtering rule based on the Ether Type of the frame.
VLAN Configure the filtering rule based on the frame’s VLAN ID.
Permit/Deny
Select whether the frames that satisfy the requirements can be forwarded to the
other port or not.
Permit
Forwards the incoming frames to the other port. Any packets or frames out of the
range of permitted MAC addresses will be dropped.
Deny
Drops the incoming frames.
Egress Queue
Apply the scheduling to the frames that satisfy the requirement and configure
the priority. Select the priority from 0 (lowest) to 7 (highest).
The scheduling is executed based on strict or WRR. It depends on the settings on
the [Advanced] - [QoS] page. If QoS is disabled, it will be based on WRR.
Redirect Port
Forwards the frames that satisfy the requirements to the specified port. If
enabled, the frames will not be forwarded to the primary destination port.
If the rule is set to [Deny], the frames will be dropped and will not be forwarded
to the primary destination port.
About Address and Mask
This product adopts “wildcard masks”. To configure the source MAC address or destination MAC address, refer to the
following example.
To specify the range of “00:11:22:ab:cd:00” to “00:11:22:ab:cd:ff
Enter “00:11:22:ab:cd:00” in the address field and also enter “00:00:00:00:00:ff in the mask field.
To specify only “00:11:22:ab:cd:ef
Enter “00:11:22:ab:cd:ef in the address field and also enter “00:00:00:00:00:00” in the mask field.
64
Chapter 2 Settings
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo BS-GS2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo BS-GS2016 in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info