678367
53
Zoom out
Zoom in
Previous page
1/93
Next page
RADIUS
Configure the RADIUS server.
Authentication Check to enable authentication server.
Authentication Server IP Enter the authentication servers IP address.
Authentication Server
Port
Enter the authentication servers port number. (1-65535)
Shared Secret
Enter the shared secret of the authentication server. You may enter up to 20
alphanumeric characters, hyphens, and underscores.
Reset Timer Enter the time that passes before re-authentication.
Advanced
Accounting
If enabled, notify the connection status to the RADIUS server.
Termination-Action
If you follow the termination-action notified by the server, enable this.
Dynamic VLAN Assignment
If enabled, the VLAN to which the port belongs to can change dynamically based
on the authentication information received from the RADIUS server. You need to
add attributes in the RADIUS server settings in advance to use dynamic VLAN . For
more information, refer to “RADIUS Server Settings to Use Dynamic VLAN” section
below.
Note: This product’s dynamic VLAN can only be used with 802.1X port
authentication.
Notes:
Use only the primary authentication server under normal conditions. Use the secondary server when a backup
server is used.
Session-timeout is fixed to 5 seconds and the number of confirmation times is fixed to 3 times.
To delete configured shared secret, initialize the switch. You do not have to initialize the switch when you change
the shared secret.
RADIUS Server Settings to Use Dynamic VLAN
When dynamic VLAN is enabled, add the following attributes to the RADIUS server.
Attribute Value
Tunnel-Type 13 (VLAN)
Tunnel-Medium-Type 6 (IEEE-802)
Tunnel-Private-Group-ID VLAN ID that the authenticated user will belong to
52
Chapter 2 Settings
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo BS-GS2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo BS-GS2016 in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info