784865
33
Zoom out
Zoom in
Previous page
1/40
Next page
WIRING DIAGRAM  W2000, W2001
ELECTRICAL WIRING: ALL MODELS
ELECTRICAL WIRING
Bonding lugs
Main power entry
Main electrical box GFCI panel
Main power entry
To complete the electrical connections of the in.yj control
system you will need a Phillips screwdriver and a flat-head
screwdriver.
Remove the screws from the system control lid and remove it.
Remove 5 1/2" (142 mm) of cable insulation.
Strip away 1/2" (15 mm) of insulation from each wire.
Pull the cable through the cutout of the box and secure it
with a 3/4" NPT strain relief* (hole diameter 1.09" {27.6 mm}).
Ensure that the NPT strain relief clamps around the outer
sheath of the cable.
* For CE/AUS/NZ use an IEC certified plastic bushing that will
maintain the IPX5 rating.
WARNING!
Disconnect power before starting electrical work.
Wiring must be completed by a qualified electrician
and must be done in accordance with the local
electrical code.
Do not use a wire gauge bigger than 8 AWG.
WARNING!
For units for use in other than single-family dwellings, a
clearly labeled emergency switch shall be provided as
part of the installation. The switch shall be readily acces-
sible to the occupants and shall be installed at least 5'
(1.52 m) away, adjacent to, and within sight of the unit.
-----
This product must always be connected to a circuit
protected by a ground fault interrupter.
-----
Proper wiring of the electrical service box, GFCI and
in.yj terminal block is essential!
-----
Check your electrical code for local regulations. Only
copper wire should be used, never aluminum.
-----
Disposal of the product
The appliance (or the product) must be disposed
of separately in accordance with the local waste
disposal legislation in force.
33
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bueno Spa Boston at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bueno Spa Boston in the language / languages: English as an attachment in your email.

The manual is 6.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info