Commissioning (for single boiler application) | 39
5.7 Adjusting and setting CO
2
limits
NOTICE:
Please verify parameter 99 is to be set rst.
Insert a combustion analyzer probe into the test port “A” as shown in Fig.
67.
Fig. 67
►Press “Menu” key.
►Select “System Test”:
►In “System test” menu select “High Power” using “Up/Down” keys and
press “OK”:
ù
e “Test Status” switches to “on” and in the display will appear the fan speed. Wait 2 or 3 minutes to to reach steady state conditions and record the CO2 value.
To adjust the CO2 value at the maximum power turn the screw “A” shown
in Fig. 69 (for SSB255) and in Fig. 70 (for SSB399 and SSB512), allen
type wrench is necessary for this adjustment.
Fig. 68 Gas valve screw regulation for SSB255
Fig. 69 Gas valve screw regulation for SSB255
Fig. 70 Gas valve screw regulation for SSB399 and SSB512
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Buderus SSB512 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Buderus SSB512 in the language / languages: English as an attachment in your email.
The manual is 9,92 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
