636471
5
Zoom out
Zoom in
Previous page
1/12
Next page
Product description | 5
6 720 805 220 (2012/10)Stainless Steel Condensing Boiler - SB625WS / SB745WS
2 Product description
The oil/gas fired boiler SB625WS/SB745WS has been developed and
built employing the latest technologies and safety regulations.
Particular emphasis is placed on ease of operation. Please observe the
safety instructions and the operating instructions to ensure optimum
safe, economical and environmentally-friendly operation of your
system.
The main components of the SB625WS/SB745WS gas/oil fired boiler
are:
Boiler block [3].
The boiler block transfers the heat generated by the burner to the
heating water.
Boiler shell [1], thermal insulation [2].
The boiler jacket and thermal insulation minimize energy loss.
Fig. 1 Oil/gas fired boiler Buderus SB625WS/Buderus SB745WS
[1] Boiler shell (jacket)
[2] Thermal insulation
[3] Boiler block
2.1 Correct use
The SB625WS/SB745WS is designed for heating boiler water and water
heating. Any other purpose is considered improper use. Any resulting
damage is excluded from the manufacturer's warranty.
The SB625WS/SB745WS can be operated with gas, oil, and
combination burners. For a list of the approved burners, please contact
Bosch Thermotechnology Corp. Required operating conditions of
allowable fuels may be found in the boiler installation manual.
The boiler can be operated with an aquastat, the Logamatic 4000, and
other control systems.
2.2 Certification and testing mark
This appliance has been tested and certified and meets all applicable
standards for the US and Canadian markets.
2.3 Data plate
Serial number plate
The serial number plate is located on the rear of the boiler block and
specifies the serial number and model.
Data plate
This lists the appliance’s technical specifications and performance. The
data plate will be factory installed on the boiler side panel.
2.4 The correct fill and make-up water
Note the fundamental system-specific water quality requirements.
Water designation
Water is used as the heat transfer medium in your heating system.
Depending on its purpose, the water is given different descriptions.
Heating water:
Water contained within your heating system.
Fill water:
Water used for the first filling of your system before commissioning.
Make-up water:
Water used for topping up the heating system in case of water loss.
Water quality requirements
All water contains substances, e.g. Ca (HCO
3
)
2
(calcium hydrogen
carbonate) that could affect the operation of your heating system. These
can cause corrosion, scale formation or deposits.
To ensure your heating system always operates economically, properly
and safely, not to mention in an energy-efficient manner, we require that
you regularly monitor the quality of the fill and make-up water and treat
it accordingly as and when necessary.
6 720 805 220-01.1T
1
2
3
If you contact the manufacturer with any questions about
this product, always provide the details on the data plate
and serial number plate. These details enable us to assist
you specifically and quickly.
If these plates or any other means of clearly identifying
the product are defaced, removed or lost, proper
installation and servicing may be difficult.
NOTICE: System damage from corrosion or scale
formation as the result of using fill and make-up water
that does not conform to the system-specific
requirements.
Ask your trained and certified installer or local water
company what the concentration of Ca (HCO
3
)
2
(calcium hydrogencarbonate) is in your area.
If the fill and make-up water does not meet system-
specific requirements, it will have to be treated.
Consult your trained and certified installer if this is the
case.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus SB745WS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus SB745WS in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus SB745WS

Buderus SB745WS Installation Guide - English - 52 pages

Buderus SB745WS Installation Guide - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info