636470
22
Zoom out
Zoom in
Previous page
1/52
Next page
22 | Installation
SB625WS/SB745WS6 720 805 218 (2016/02)
5.3.2 Removing the hinge assembly “B”
Ensure that the side safety bolt is tight.
Remove the main fixing bolt.
With the door open, remove the hinge assembly ‘B’ (bushing, bolt,
and washer) opposite the pivot side of the door.
Fig. 20 Remove hinge assembly B
[1] Bushing
[2] Washer
[3] Bolt
5.4 Burners
Installing the burner
Follow the burner manufacturer’s instructions when fitting the burner.
An accessory plate may be required if a non-standard burner is used (see
factory for details).
Follow the burner manufacturer’s instructions when fitting the burner.
As standard, the burner plate gasket must be trimmed in order to fit the
burner blast tube. The installer must cut the hole 3/8" larger than the
blast tube diameter.
The combustion chamber door must be opened to allow the burner to be
mounted.
Fig. 21 Burner
[A] Ceramic insulation (shipped loose)
[L] Minimum length
[Ø ] Diameter
A
1
3
2
6 720 805 218-31.1T
A pre-drilled burner plate is included with the boiler
vessel.
When you finish installing the burner, fill the gap
between the burner tube and the refractory material in
the door with the ceramic insulation (A) supplied with
the boiler.
A
Ø
L
6 720 805 218-63.1T
SB625WS SB745WS
Model 160 220 290 370 480 640 800 1050 1300 1550
Min. L
inch (mm)
6 5/16
(160)
6 11/16
(170)
7 1/16
(180)
7 1/16
(180)
7 11/16
(195)
7 7/8
(200)
7 7/8
(200)
7 7/8
(200)
8 1/16
(205)
8 1/16
(205)
DOOR HOLES Ø
inch (mm)
7 1/2
(190)
7 1/2
(190)
8 7/8
(225)
8 7/8
(225)
10 1/4
(260)
10 1/4
(260)
10 1/4
(260)
10 1/4
(260)
12 3/16
(310)
12 3/16
(310)
Table 9 Installation dimensions
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus SB625WS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus SB625WS in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus SB625WS

Buderus SB625WS User Manual - English - 12 pages

Buderus SB625WS Installation Guide - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info