560499
25
Zoom out
Zoom in
Previous page
1/36
Next page
Logamatic EMS RC25 programming unit - Subject to technical modifications
25
Information on setting the programming unit
6
6 Information on setting the programming unit
6.1 Types of control
The heating system can be operated in three control modes. Depending on your requirements, your
heating contractor will select and set up one of these options:
Room temperature control
With this control mode, the programming unit must be fitted in a room that is fairly typical for the
home. The programming unit records the room temperature in this “reference room”. Control of the
flow temperature is determined by the set room temperature and the actual room temperature.
Consequently external temperature influences in the reference room (e.g. open windows, sunlight
or heat from a fireplace) will affect your entire home.
Set the room temperature of your home or reference room at the programming unit. You can
produce higher or lower temperatures in the other rooms by adjusting the thermostatic radiator
valves.
Weather-compensated control
The temperature of the heating water in the boiler is defined by the heating curve. You can select
whether this heating curve will be influenced solely by the outside temperature, or whether the
temperature in the reference room should also have an influence.
Purely weather-compensated control:
The outside temperature is captured by a temperature sensor. The flow temperature is calculated
solely on the basis of the outside temperature in accordance with the set heating curve.
You can set the room temperature for the entire home at the programming unit (which will shift
the heating curve up or down). You must adjust the thermostatic radiator valves in every room in
order to achieve the required room temperature.
Weather-compensated control with room temperature hook-up:
With this control mode the flow temperature is primarily determined by the outside temperature,
but is also influenced by the room temperature to the extent selected by your heating contractor.
The following applies to room temperature control and for weather-compensated
control with room temperature hook-up:
The thermostatic radiator valves in the “Reference room” (the room where the
programming unit is installed) must be fully open! Control of the flow temperature is
determined by the room temperature recorded there. It must not be limited by closed
thermostatic valves.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus RC25 - Logamatic EMS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus RC25 - Logamatic EMS in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus RC25 - Logamatic EMS

Buderus RC25 - Logamatic EMS Installation Guide - English - 44 pages

Buderus RC25 - Logamatic EMS User Manual - German - 36 pages

Buderus RC25 - Logamatic EMS User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info