560499
20
Zoom out
Zoom in
Previous page
1/36
Next page
Function control
Logamatic EMS RC25 programming unit - Subject to technical modifications
20
5
5.3 Setting DHW functions
Risk of scalding from DHW temperatures over 60 °C!
The programming unit also offers you the option of heating DHW in an energy-conscious manner.
The setting is subject to how the programming unit was installed (Æ Chapter 6.1, page 25):
If the RC25 programming unit operates as the only programming unit in the system, DHW
heating commences automatically 30 minutes prior to the start of day mode of the heating
program. DHW is not produced during night mode. In day mode, the DHW circulation pump is
started twice per hour for three minutes to safeguard the constant supply of taps with hot water.
1)
The DHW temperature can be set to a maximum of 60 °C (= factory setting). For UK an RC35
must be used for DHW control to comply with part L.
If the RC25 programming unit is installed as a remote control for one heating circuit,
2)
then DHW
heating and the operation of the DHW circulation pump will be set for the entire heating system
with the higher programming unit (e.g. RC30/RC35). The set DHW temperature can be changed
with the RC30/RC35 or the RC25 programming units; however, the setting range of the RC30/
RC35 programming units applies (maximum 80 °C).
5.3.1 Checking or changing the DHW temperature
Initial situation: the flap is closed.
WARNING: Risk of scalding!
The factory setting for the DHW temperature is 60 °C. There is a risk of scalding at the
hot water draw-off points if the temperature is set higher than this and also following
thermal disinfection.
B If the temperature set is higher than 60 °C or following thermal disinfection, never
open any hot water tap without mixing in cold water as well.
1) Function dependent on the boiler used.
2) Function not available on boilers with UBA.
Operation Result
1. Hold down and simultaneously turn rotary selector .
The value can be changed.
2. When you have reached the required DHW temperature,
release the rotary selector.
The modified temperature is saved.
The standard display appears again.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus RC25 - Logamatic EMS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus RC25 - Logamatic EMS in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus RC25 - Logamatic EMS

Buderus RC25 - Logamatic EMS Installation Guide - English - 44 pages

Buderus RC25 - Logamatic EMS User Manual - German - 36 pages

Buderus RC25 - Logamatic EMS User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info