697437
27
Zoom out
Zoom in
Previous page
1/52
Next page
4
Installation
Logano GE615 - Subject to technical modifications.
27
4.14 Boiler flue connection
This chapter describes how the boiler flue connections
are made.
4.14.1 Fitting the flue pipe sealing collar
(accessory)
B Push the flue pipe as far as possible onto the flue gas
header outlet.
B Place the flue pipe sealing collar around the flue pipe
and flue gas header outlet so that it overlaps at the top.
B Place jubilee clips over the flue pipe sealing collar. One
of the jubilee clips must press onto the flue gas header
outlet and one onto the flue pipe.
B Tighten jubilee clips. The flue pipe sealing collar must
fit smoothly and firmly in place.
Fig. 36 Making the flue pipe sealing collar
1 Flue pipe sealing collar
2 Flue gas temperature sensor
3 Fem. connection
4 Flue
5 Jubilee clips
6 Flue gas collector
4.14.2 Fitting the flue gas temperature sensor
(accessory)
B Weld the coupling into the flue pipe at a distance of
2 × flue pipe diameters (A) from the flue gas header.
B Fit the flue gas temperature sensor as described in the
separate installation manual.
4.15 Installing the boiler casing
4.15.1 Fitting the thermal insulation
The insulation provided corresponds to the boiler size.
B Arrange the lagging on the boiler block as shown in the
diagram in Æ Fig. 38 (the figures to the left of the boiler
blocks represent the number of boiler sections).
B Push lagging under the boiler block. The boiler section
feet are placed in the cut-outs in the lagging.
Fig. 37 Boiler block with thermal insulation
1 Thermal insulation
For better sealing of the boiler/flue pipe, we
recommend that you use the flue pipe sealing
collar (accessory).
Retighten the jubilee clips if required.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logano GE615 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logano GE615 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logano GE615

Buderus Logano GE615 User Manual - German - 12 pages

Buderus Logano GE615 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info