636472
11
Zoom out
Zoom in
Previous page
1/56
Next page
6
Positioning the boiler
Logano G315 – 6 720 817 939 (2016/04) 11
6 Positioning the boiler
This chapter describes how to properly position the Logano G315.
6.1 Tools and auxiliary materials
The following tools and auxiliary materials are required for the boiler
assembly (the listed items must be provided by the installer):
Boiler assembly tool 2.3 ( Fig. 4)
Installation kit (accessory)
Steel hammer and wooden or rubber mallet
Half-round bastard file
Screwdriver (Philips and flat head)
Flat chisel
Metric wrenches
Support wedge, flat iron
Cleaning rags and cloth
Fine emery cloth
Wire brush
3-in-1 oil
Solvent (gasoline, mineral spirits)
Spirit level, tape measure, chalk, straight edge
Blanking flange with vent facility (for pressure test)
6.1.1 Boiler assembly tool size 2.3
Fig. 4 Boiler assembly tool size 2.3
[1] Mating flange
[2] Additional flange
[3] Compression unit (pressure flange with clamping nut)
[4] Tie rod
[5] Extension
[6] Wedge (size 2.3)
L
1
121-1/4 inches (3080 mm)
L
2
31-1/2 inches (800 mm)
6.2 Recommended wall clearances
Fig. 5 Installation room with boiler
Observe the recommended wall clearances for complete opening of the
burner door, for boiler installation and for cleaning and maintenance
Fig. 5.
The burner door can be hung with the hinges on the right or left.
When installing your boiler maintain the recommended minimum
dimensions. Select the recommended clearances between wall and
boiler for easy access for installation, maintenance and service work.
The wall clearance on the hinge side must be at least the burner
projection (AB). A distance of AB +4 inches (AB + 100 mm) from the
wall is recommended.
The length LK depends on the number of boiler sections or boiler rating
Spare parts, page 39.
NOTICE: Risk of damage from freezing.
Install the system in a room free from thedanger of
freezing.
6 720 642 623-03.1o
3 2 1
6
4 5
L
1
L
2
L
2
Boiler sections
Assembly
tool(s) per
boiler hub
Extension piece
per boiler hub
Length (total) in
inches (mm)
5...9 1 3 121-1/4
(3080 mm)
Table 7
For the correct arrangement of the flange when
performing the assembly procedure, refer to page 22.
6 720 642 621-02.1o
L
K
(400 mm)
≥ 15 3/4"
(880 mm)
34 41/64"
(AB+100 mm)
AB + 4"
AB
A
(~ 750 mm)
29 1/2"
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logano G315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logano G315 in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logano G315

Buderus Logano G315 User Manual - English - 8 pages

Buderus Logano G315 Installation Guide - French - 56 pages

Buderus Logano G315 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info