636472
7
Zoom out
Zoom in
Previous page
1/8
Next page
4
Shutting down the system
G315 – 6 720 817 940 (2016/04) 7
Using a Hydrolevel Hydrostat®
After the Hydrolevel Hydrostat® is powered up all settings are displayed
in the dynamic display.
Use the corresponding limit switches ( Fig. 5) to choose the
needed operation mode (cold start or warm start operation).
Fig. 5 Control panel Hydrostat® Hydrolevel
[1] Low temperature limit switch
[2] High temperature limit switch
[3] High temperature differential switch
[4] Low temperature differential switch
4 Shutting down the system
This chapter explains how you shut down your boiler and switch off the
control panel and the burner. Furthermore, it contains details on how to
shut down your heating system in an emergency.
Shut off the fuel supply at the main fuel shut-off valve.
4.1 Switching off the control panel and the burner
Shut down your boiler via the main power switch or designated circuit
breaker. The burner is automatically shut down when the main power is
switched off.
4.2 Shutting down the system in an emergency
In other dangerous situations, immediately close the main fuel shut-off
valve and the power supply of the heating system using the emergency
shutoff switch or by disengaging the heating system circuit breaker
( Chapter 1.2, page 3).
5 Correcting burner faults
Heating system faults are shown on the control panel display. You will
find detailed information regarding fault displays in the service
instructions for the relevant control panel. The burner fault is also
indicated by a fault lamp on the burner.
Press the burner reset button (see burner operating instructions).
If the burner does not restart after three attempts, refer to the technical
documentation provided with the burner to find out how to reset it.
The Hydrolevel Hydrostat® control is for oil applications
only!
Follow the control panel operating instructions.
NOTICE: Risk of system damage from freezing.
The system can freeze up if it is out of service, e.g.
from a shutdown because of fault(s).
Protect your system against frost damage where
temperatures below freezing are expected.
Drain the heating water at the lowest point in the
system. To do this, open the purger at the highest
point in the system.
1 2
34
6 720 817 940-01.1T
For further details on this subject, see the operating
instructions for the relevant control panel.
Only in emergencies, switch off the system using the
emergency shutoff switch or by disengaging the heating
system circuit breaker.
NOTICE: Risk of system damage from freezing.
The system can freeze if it is out of service, e.g. from
a shutdown because of fault(s).
If the system remains switched off for several days
because of a fault shutdown, you should drain the
heating water at the lowest point in the system to
protect it against freezing.
NOTICE: Risk of system damage due to too many resets.
The burner ignition transformer may be damaged if
you press the reset button more than three times in
succession when the burner refuses to start.
Do not attempt to remedy the fault by pressing the
reset button more than three times in succession.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logano G315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logano G315 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logano G315

Buderus Logano G315 Installation Guide - English - 56 pages

Buderus Logano G315 Installation Guide - French - 56 pages

Buderus Logano G315 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info