560473
61
Zoom out
Zoom in
Previous page
1/100
Next page
Servicing 14
61
We reserve the right to make any changes due to technical modifications!
Installation and Servicing Instructions Logamax plus GB142-24/30/45/60 • Version 12/2004
Buderus Hydronic Systems • http://www.buderus.net
14.16 Checking the ionization electrode;
replace if necessary
z Disconnect the heating system from the power
supply, remove the main fuse or switch off the circuit
breaker.
z Set the main switch on the BC10 to "0" (Off).
z Remove the casing.
z Disconnect the plug and socket connection of the
cable.
z Set the volt-ohm-multiammeter to "Resistance
testing".
z Test the earth connection circuit of the ionization
electrode (see fig. 66). The height of the resistance
value must be infinite.
z Loosen the fastening screws (see fig. 68, pos. 1).
z Remove the earth cable (see fig. 68, pos. 2).
z Remove the mounting plate (see fig. 68, pos. 3).
z Dismantle the ionization electrode (see fig. 68,
pos. 4).
z Set the volt-ohm-multiammeter to "Resistance
measurement".
z Test the resistance of the ionization electrode (see
fig. 69). The resistance must be 0 :.
z Do a visual check of the ionization electrode.
z Check the ionization electrode for contamination,
wear or damage (see fig. 70).
z Replace the ionization electrode if required.
z Install a new ionization electrode with a new gasket
and secure the mounting plate with the fastening
screws.
z Fit the earth cable (see fig. 68, pos. 2).
z Restore the plug and socket connection.
z Fit the casing.
z Connect the heating system to the power supply,
insert the main fuse or switch on the circuit breaker.
z Set the main switch on the BC10 to "1" (On).
Fig. 68 Replacing the ionization electrode
Fig. 69 Testing the resistance of the ionization electrode
Fig. 70 Checking the ionization electrode
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamax plus GB142-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamax plus GB142-30 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logamax plus GB142-30

Buderus Logamax plus GB142-30 User Manual - German - 16 pages

Buderus Logamax plus GB142-30 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info