560473
39
Zoom out
Zoom in
Previous page
1/100
Next page
BC10 basic controller 10
39
We reserve the right to make any changes due to technical modifications!
Installation and Servicing Instructions Logamax plus GB142-24/30/45/60 • Version 12/2004
Buderus Hydronic Systems • http://www.buderus.net
10.2 Carrying out additional tasks
10.2.1 Carrying out a flue gas test
The "Chimney Sweep"
button is used for the flue gas
test.
The heating control system works at the maximum flow
temperature for 30 minutes. This is set on the BC10
basic controller using the "maximum heater tempera-
ture" knob. During flue gas testing the decimal point
lights up in the display.
z Press and hold the "Chimney Sweep"
button
(< 5 seconds) until the decimal point is displayed.
z Carry out the flue gas test.
z Press the "Chimney Sweep"
button to interrupt the
flue gas test.
10.2.2 Selecting partial load operation (e. g. during
flue gas testing)
You can operate the appliance at a reduced appliance
capacity during flue gas testing. This reduction is only
effective for the duration of the flue gas test.
z Press the "Chimney Sweep"
button (max.
2 seconds) until the decimal point shows in the status
display. This will switch on the flue gas test.
z Press and hold the "Chimney Sweep"
and
"Service"
buttons (for approx. 5 seconds) to enter
the partial load mode.
z Press the "Reset"
button to reduce the appliance
capacity percentage.
Example: appliance capacity reduced to 50 % of the
rated appliance capacity.
z Press the "Chimney Sweep"
button to increase
the appliance capacity percentage.
z When test is completed, press the "Service"
button until the temperature indication is displayed.
z Press the "Chimney Sweep"
button until the
decimal point is cleared from the display.
10.2.3 Switching the heating system to manual
mode
In manual mode the heating system can be operated
independently of an external control unit. The appliance
is operated with the heating system temperature set on
the right knob serving as the target value.
A blinking decimal point is displayed while manual mode
is active.
z Press the "Chimney Sweep"
button (for more than
5 seconds) until the decimal point in the status
display flashes.
+
/
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamax plus GB142-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamax plus GB142-30 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logamax plus GB142-30

Buderus Logamax plus GB142-30 User Manual - German - 16 pages

Buderus Logamax plus GB142-30 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info