488170
22
Zoom out
Zoom in
Previous page
1/36
Next page
http://www.buderus.net 22
Starting up the boiler
Fill the heating system to a pressure of appx.
20 psi (1.5 bar). Read the pressure from the
pressure gauge on the pump group or on the
control panel of the BC10 (fig. 6).
The pressure in the heating system, which is
measured directly at the boiler, must be at least
equal to the required pre-pressure of the expansion
vessel plus 7 psi (0.5 bar). The minimum pressure
must not be less than 15 psi (1.0 bar) (if the heating
system is cold). The maximum pressure in the
heating system must not exceed 50 psi (3.5 bar).
Fig. 6 Reading the pressure gauge
P22
1
110
140
130
120
90
100
130
170
150
90
110
190
psi
10
20
30
I
NOTICE
It is very important that the heating
system is now purged, since all air will
collect at the highest point of the heating
system when the system is slowly filled
with water.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamax plus GB162-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamax plus GB162-80 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logamax plus GB162-80

Buderus Logamax plus GB162-80 Installation Guide - German - 96 pages

Buderus Logamax plus GB162-80 Installation Guide - German - 112 pages

Buderus Logamax plus GB162-80 User Manual - German - 12 pages

Buderus Logamax plus GB162-80 Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info