557396
34
Zoom out
Zoom in
Previous page
1/40
Next page
Storingen verhelpen
Logamatic RC200 – 6 720 808 145 (2013/04)34
8
A61
A62
A63
A64
1010 Geen communicatie via
de BUS-verbinding EMS
plus.
(A61 = cv-circuit 1;
A62 = cv-circuit 2;
A63 = cv-circuit 3;
A64 = cv-circuit 4)
Controleer, of de buskabel verkeerd is
aangesloten
Los de bedradingsfout op en schakel het re-
geltoestel uit en weer in
Controleer, of de buskabel defect is.
Verwijder de uitbreidingsmodule van
EMS-BUS en schakel het regeltoestel uit
en weer aan. Controleer, of de oorzaak
van de storing de module of de module-
bedrading is
Repareer de buskabel of vervang deze
Vervang defecte EMS-BUS-busdeelnemers
A61
A62
A63
A64
1037 Buitentemperatuursen-
sor defect.
(A61 = cv-circuit 1;
A62 = cv-circuit 2;
A63 = cv-circuit 3;
A64 = cv-circuit 4)
Controleer de configuratie. Met de geko-
zen instelling is een buitentemperatuur-
sensor nodig
Verander de configuratie
Controleer de verbindingskabel tussen
regeltoestel en buitentemperatuursen-
sor op doorgang
Los de storing op, wanneer geen doorgang
aanwezig is
Controleer de elektrische aansluiting van
de verbindingskabel in de buitentempe-
ratuursensor respectievelijk aan de stek-
ker in het regeltoestel
Los het contactprobleem op, wanneer
schroeven of een stekker los zitten
Controleer de buitentemperatuursensor
conform de tabel
Vervang de sensor, wanneer de waarde niet
overeenkomen
Controleer de spanning op de aansluit-
klemmen van de buitentemperatuursen-
sor in het regeltoestel conform de tabel
Vervang het regeltoestel, wanneer de sen-
sorwaarden kloppen, maar de spannings-
waarden niet overeenkomen
A61
A62
A63
A64
1081
1082
1083
1084
Twee master-bedienings-
eenheden in het systeem.
(A61/1081 = cv-circuit 1;
A62/1082 = cv-circuit 2;
A63/1083 = cv-circuit 3;
A64/1084 = cv-circuit 4)
Controleer in het installatieniveau de pa-
rametrering
De bedieningseenheid voor cv-circuit 1 ... 4
als master aanmelden
A61
A62
A63
A64
3091
3092
3093
3094
Kamertemperatuursen-
sor defect
(A61/3091 = cv-circuit 1;
A62/3092 = cv-circuit 2;
A63/3093 = cv-circuit 3;
A64/3094 = cv-circuit 4)
Systeemregelaar of afstandsbediening
defect
Systeemregelaar of afstandsbediening ver-
vangen
Hxx ... ... Bijvoorbeeld service-interval van de
warmteproducent is verlopen.
Service nodig, zie documenten van de warm-
teproducent.
Storings-
code
Sub-
code
Oorzaak of storingsbe-
schrijving
Testprocedure/oorzaak Maatregel
Tabel 20 Tabel met storingen
34


Need help? Post your question in this forum.

Forumrules
1

Forum

buderus-logamatic-rc200

Reset search

  • How do I get operating instructions in English for this model of thermostat?
    It is fitted to the heating system at my new Villa in TRNC Cyprus and I haven't a clue how to use it.
    I would be gratefull for any assistance.
    Keith Battersby Submitted on 28-3-2023 at 16:52

    Reply Report abuse
  • How can I remove the external compensation on rc200 thermostat? Submitted on 19-12-2021 at 17:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamatic RC200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamatic RC200 in the language / languages: Dutch as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logamatic RC200

Buderus Logamatic RC200 User Manual - German - 32 pages

Buderus Logamatic RC200 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info