697445
75
Zoom out
Zoom in
Previous page
1/80
Next page
Operation in the event of a fault
11
Logamatic 4323 - Subject to technical modifications.
75
11.2 Heating with manual override
In most cases, faults are displayed on the MEC2 if they
concern the control unit.
Please notify your installer of the fault displayed on the
MEC. Your installer can provide rapid assistance in
remedying these faults using the information you
provide.
If you cannot immediately contact your installer, you
may choose to select manual mode using the manual
switch.
Manual mode Logamatic 4323 (ZM433 central
module)
Before making any adjustments for manual mode, check
the settings on the various modules for possible
incorrect settings. If the control system indicates a fault
you may temporarily run your heating system manually.
z Switch on the control unit via the ON/OFF switch.
z Set feed circuit (Æ Fig. 26, [1]) via selector
to manual 3.
z
Set heating circuit (
Æ
Fig. 26, [2]) at selector
to manual
3
.
In case of faults, immediately notify your installer who
will provide a professional service. Inform your installer
of the fault message displayed on
the MEC2.
Manually de-couple the heating circuit mixer and
position towards hotter or colder, until the required
room
temperature has been achieved.
Fig. 26 ZM433 central module
1 Manual feed circuit switch
2 Manual switch – heating circuit 0
1
2
USER NOTE
To prevent insufficient supply, check that
the external heat generator can deliver
sufficient heating energy, before operating
the feed pump manually.
USER NOTE
To ensure operational reliability, mixer
circuits must not be fully closed.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamatic 4323 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamatic 4323 in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info