697444
48
Zoom out
Zoom in
Previous page
1/84
Next page
Extended functions
7
Logamatic 4321/4322 - Subject to technical modifications.
48
7.18 Setting the party function
This function only applies to heating circuits to which the MEC2 has been
assigned as a remote control unit ("MEC heat. circ."). All heating circuits without
an MEC2 operate normally.
Enter the number of hours the heating system should only operate with
the preset room temperature.
Example:
You have a party and want to heat for the next four hours to the preset room
temperature.
Hold down "Day mode", and simultaneously open the flap of the MEC2.
"Party function" is enabled. Hold "Day mode" down, and turn the rotary selector
until the required number of hours is displayed (here: "4").
The display shows the party function together with the set number of hours.
Release the "Day mode" key.
The party function starts immediately. After the set time has expired, the heating
system returns to automatic heating mode.
If you want to cancel the party function, call up party function as described above
and turn the rotary selector to "0".
7.19 Setting the pause function
This function only applies to heating circuits to which the MEC2 has been
assigned as a remote control unit ("MEC heat. circ."). All heating circuits without
an MEC2 operate normally.
Enter the number of hours the heating system should only operate to the preset
room temperature.
Example:
You are about to leave your home for three hours and would like to heat less
whilst you are away.
Hold down "Night mode", and simultaneously open the flap of the MEC2.
The pause function is enabled. Continue to hold down "Night mode", and select
the required number of hours with the rotary selector (here: "3").
The display shows the pause function together with the set number of hours.
Release the "Night mode" key.
The pause function starts immediately. After the set time has expired,
the heating system returns to automatic heating mode.
If you want to cancel the pause function, call up pause function as described
above and turn the rotary selector to "0".
+
Party function
4 Hours
+
Pause function
3 Hours
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamatic 4322 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamatic 4322 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info