557481
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
Operating instructions Logamatic 4212 control device • Issue 02/2006
We reserve the right to make any changes due to technical modifications.
Operating instructions Logamatic 4212 control unit1
1.1 Heating mode
This setting is designed for central heating and DHW
(Domestic Hot Water) cylinder heating.
1.2 Two-stage mode
The boiler water thermostat (Fig. 1, Item 2) is a two level
thermostat for two-stage burner operation.
The switching point of the second stage of the boiler
water thermostat is approx, 5 °C lower than that of
stage 1.
1.3 Burner fault display
If the burner fault lamp illuminates (Fig. 1, Item 8), ask
your local heating engineer to remedy the fault.
PLEASE NOTE:
The boiler water thermostat (Fig. 1,
Item 2) must be set to a minimum of 80 °C,
if the boiler is equipped with a boiler
module ZM 427 or an external control unit.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamatic 4212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamatic 4212 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logamatic 4212

Buderus Logamatic 4212 User Manual - German - 8 pages

Buderus Logamatic 4212 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info