697441
67
Zoom out
Zoom in
Previous page
1/88
Next page
Additional programming options
8
Logamatic 4121, 4122 and 4126 - Subject to technical modifications.
67
8.4 Creating a new DHW circulation pump program
You can operate the DHW circulation pump either according to the factory
settings "Program select. by heat. circs" or according to your own new switching
program "Program select. own CP".
If your circulation pump should work independently of the heating circuits, you
can enter your own new DHW circulation pump program as follows:
Example:
The DHW circulation pump is to run on all weekdays from 06:30 to 09:00 h.
z Select a heating circuit (Æ Chapter 7.6).
(here: "DHW circulat.")
z Select a program for the heating circuit "DHW circulat." (Æ Chapter 7.10).
(here: "Program select. new")
The display shows the blank screen "New switch.point" for the new switching
point.
z Enter the switching points (Æ Chapter 8.2).
Your DHW circulation pump will now operate according to your "Own program
CP". You can call up your new "Own program CP" by pressing "Prog" and
turning the rotary selector.
USER INFORMATION
With the factory setting "Program select. by heat circs", the DHW circulation
pump will automatically start 30 minutes before the first switching point of all
heating circuits associated with this control unit, and end when the last heating
circuit is stopped.
New switch.point
--------------
----
at ---
USER INFORMATION
Only after all three details (day/time/temperature) have been defined for the
new switching point will it be automatically saved under "Own program CP" and
the heating circuit number "DHW circulat.". This saving is not shown on the
display. The display shows the blank screen "New switch.point" for the next
switching point. Repeat this process for all required switching points.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamatic 4122 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamatic 4122 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logamatic 4122

Buderus Logamatic 4122 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info