697441
23
Zoom out
Zoom in
Previous page
1/88
Next page
Standard functions
6
Logamatic 4121, 4122 and 4126 - Subject to technical modifications.
23
6.4 Setting the room temperature
With the flap closed you can adjust the room temperature with the rotary
selector. With the flap open, also press "Day mode" or "Night mode".
With the rotary selector, you can select the room temperature in degree steps
between 11 °C (day), or 2 °C (night), and 30 °C. The set temperature is
displayed via an LED next to the rotary selector. For temperatures below 15 °C
or above 25 °C, the "–" or "+" LED illuminates.
The factory setting for the day room temperature is 21 °C.
The factory setting for the night room temperature is 17 °C.
Any adjustment applies to all heating circuits assigned to the MEC2
programming unit (Æ
Chapter 7.7).
6.4.1 For the current operating mode
You are currently in automatic "Day mode" and would like to alter the room
temperature.
(Condition: For this, the programming unit flap must be closed.)
Turn the rotary selector to the required day room temperature (here: "23°C").
The day room temperature is now adjusted to 23 °C. The selected permanent
display will then appear again.
Tag Zeit Temp
Urlaub Auswahl So/Wi
Anzeige Heizkreis Zurück
AUT
AUT
USER INFORMATION
The set room temperature applies to the currently enabled heating mode,
i.e.
day or night mode. You can recognise the currently enabled heating
mode
because the green LED illuminates.
Set room
Automatic day
23°C
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logamatic 4122 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logamatic 4122 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logamatic 4122

Buderus Logamatic 4122 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info