697448
8
Zoom out
Zoom in
Previous page
1/48
Next page
Deutsch Modul EM10
Änderungen aufgrund technischer Verbesserungen vorbehalten!
8 Modul EM10 • 02/2012
b) Steuerung über die Leistung
Diese Regelung wird aktiviert, indem Sie Klemme 1 und
3 überbrücken ( Bild 2, [5] und den Schaltplan auf
Seite 47). Das EM10 gibt über das 0-10 V Signal dem
Heizgerät eine prozentuale Leistung vor ( Tab. 2).
Hierbei handelt es sich um ein lineares Verhältnis,
Tab. 2.
*) Die Leistung bei Kleinlast ist vom Gerätetyp abhängig. Wenn
die Kleinlast des Geräts beispielsweise 20 % beträgt und das
Steuerungssignal 1 Volt (= 10 %), dann ist die Sollleistung
kleiner als die Niedriglast. In diesem Fall liefert das Gerät
10 % durch einen Ein/Aus-Zyklus bei Niedriglast. In diesem
Beispiel schaltet der Heizgerät ab einem Setpoint von 2 Volt
in Dauerbetrieb.
Anschließen mehrerer Module
Es ist möglich, mehrere unterschiedliche Module (z.B.
EM10 und VM10) miteinander zu verbinden. Um 2 oder
mehr Module miteinander zu verbinden, können der Netz-
anschluss ( Bild 4, [2]) und der EMS-Anschluss ( Bild 4,
[3]) immer überbrückt werden.
Achtung! Polarität beachten. Die Gesamtlänge des
EMS-Buskabels darf höchstens 100 m betragen.
Anschließen Temperaturregler
Schließen Sie den Logamatic RC Temperaturregler am
EMS-Anschluss an ( Bild 4, [3]).
Netzanschluss
Schließen Sie den 230 VAC-Netzanschluss an ( Bild 2,
[1] und Bild 4, [1]).
LED-Meldungen auf dem EM10-Modul ( Bild 1, [5])
Eingangs-
spannung
Leistungssetpoint
(Heizgerät)
Status
Heizgerät
0 V - 0,5 V 0 aus
0,6 V ± 6% Kleinlast *)
5,0 V ± 50% Teillast
10,0 V ± 100% Volllast
Tab. 2 Steuerung über die Leistung
Bild 4 Zwei Module miteinander verbinden,
Netzanschluss herstellen
1
2
3
3
2
LED-Status Bedeutung Vorgehensweise
grün (konstant) Alles ist richtig angeschlossen.
grün (blinkend) Seit mindestens 5 Minuten besteht keine
Kommunikation mit dem Heizgerät.
Reset vornehmen.
Wenn das Problem durch den Reset nicht
behoben wird, ziehen Sie Ihren Installateur zu
Rate. Siehe auch die Anleitungen des
Heizgeräts.
rot (kurze Zeit) Die Spannung ist am Heizgerät angeschlossen.
rot (konstant) Das EM10 ist defekt. Benachrichtigen Sie Ihren Installateur.
Siehe auch die Anleitungen des Heizgeräts.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus EM10 Module at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus EM10 Module in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info