650213
10
Zoom out
Zoom in
Previous page
1/42
Next page
7
To keep your battery in the best condition, leave
the handset off the base station for a few hours
at a time. (after the initial 16 hour charge)
Please note that while NiCad rechargeable
batteries can be expected to give years of
service they do not last forever. Their actual
lifespan depends on how heavily they are used
but over time, their capacity to recharge will
begin to diminish and they will eventually
need replacing.
Battery performance
After charging your Synergy 900 for the first
time, subsequent charging time for the handset
batteries is approximately 4-5 hours. Batteries
and case may become warm during charging.
This is normal and not dangerous.
Under ideal conditions, the handset battery
should give about 6 hours talktime or 60 hours
standby on a single charge. Please note,
however, that the new NiCad battery, does not
reach its full capacity until it has been in
normal use for several days.
4. Charge the handset battery for at
least 16 hours
Before you use your Synergy 900 for the first
time it is important to have the handset battery
fully charged. We recommend that you leave the
Synergy 900 Handset on charge for at least 16
hours. Place the handset on the base station.
The
CHARGING light comes on. Your handset
should come pre-registered to the base station
as HSET1. If the display shows REG, you will need
to register the handset manually by following the
simple steps on page 24, “To register a handset”.
Battery low warning
Your handset display will show the status of
your battery:
When the charge is low, the battery icon
is displayed.
When the charge is almost out, you will also
hear a warning beep every 10 seconds (during
a call) in the earpiece. This indicates that the
handset is about to switch off.
5. Connect the telephone line cord to
the Synergy 900 base station
Plug the line cord into the line socket on the
underside of your Synergy 900.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT Synergy 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT Synergy 900 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info