650216
47
Zoom out
Zoom in
Previous page
1/60
Next page
If you experience any problems, please call the Helpline on 0800 145 6789* or visit www.bt.com/producthelp
47
Registering another make of handset to your
Synergy 5100 base
If you want to register another make of handset
(i.e. not a Synergy 5100 handset) to your
Synergy 5100 base then you will need to follow
the Registration instructions that came with the
handset first and then continue with the base part
of the registration procedure (as shown opposite,
At the base’). Please note that registering
other types of handset will only provide limited
compatibility i.e. you may only be able to make
and receive calls on the additional handset.
If registration is not successful first time,
please repeat the process again incase the base
registration period ran out of time.
If there are already 5 handsets registered to
the base, the registration will fail. You must de-
register another handset before you can register
the new one.
You can use up to five BT Synergy additional handsets with your BT Synergy
5100 base to extend your phone system without needing to install telephone
extension sockets for each new phone.
Your BT Synergy 5100 handset can also be registered to up to 3 other bases.
You can then select the base you would prefer to use.
If you have purchased a BT Synergy 5100 multiple pack any additional
handsets come pre-registered to the base.
If you have purchased an additional handset separately you must register it to
your BT Synergy 5100 base before it can be used.
Registering an additional handset
At the base:
1. Press and hold
for 3 seconds until the base Power / In use starts flashing.
You have 60 seconds to complete the registration process.
At the handset:
2. If the handset is new and the display shows Please register. Press menU.
The display shows registration. Press select.
Or
If the handset has already been registered to another base the standby
display is shown. Press menU, scroll
or
to registration
and press select.
3. register HanDset is highlighted. Press select.
4. Bases are displayed. If necessary, scroll
or
to a new base you wish
to register your BT Synergy 5100 handset to and press select.
5. Enter the system PIN (default setting = 0000) then press ok.
6. The display shows searcHing Base x (where X is the chosen base number)
then HanDset registereD.
When the registration has succeeded, the handset is automatically assigned the
next available handset number.
Using additional handsets
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT Synergy 5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT Synergy 5100 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BT Synergy 5100

BT Synergy 5100 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info