650216
7
Zoom out
Zoom in
Previous page
1/60
Next page
7
If you experience any problems, please call the Helpline on 0800 145 6789* or visit www.bt.com/producthelp
Getting started
Battery low warning
If the
icon flashes in the external display
you will need to recharge the handset before
you can use it again.
During charging, the
icon will scroll in
the display.
Battery performance
In ideal conditions, fully charged batteries should
give about 10 hours talk time or 100 hours
standby time on a single charge.
Note that new batteries do not reach full capacity
until they have been in normal use for several
days.
To keep your batteries in the best condition, leave
the handset off the base for a few hours at a time.
Running the batteries right down at least once a
week will help them last as long as possible.
The charge capacity of rechargeable batteries
will reduce with time as they wear out, giving
the handset less talk/standby time. Eventually
they will need to be replaced. New batteries are
available from the BT Synergy Helpline on
0800 145 6789*.
After charging your handset for the first time,
subsequent charging time is about 6–8 hours a
day. Batteries and handset may become warm
during charging. This is normal.
2. Make sure the battery ribbon is
laying flat inside the compartment
and insert the two batteries supplied
observing the polarity markings
(+ and -).
3. Attach the battery compartment
cover by sliding the ends into the
holes inside the compartment,
pressing down and pushing the other
end along until it clicks into place.
4. Place the handset on the base to
charge for at least 24 hours. The red
charging light comes on. When the
handset is fully charged the display
shows the
icon.
5. After 24 hours, plug the telephone
line cord from the base into the
telephone wall socket.
Setting up for multiple packs
If you have purchased a multiple pack, this process will need to be carried out
for all handsets and chargers:
1. Plug the mains power cable into the socket marked
on the underside of
the charger.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT Synergy 5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT Synergy 5100 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BT Synergy 5100

BT Synergy 5100 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info