Manual BT Synergy 1000 (page 40 of 43) (English)

650255

Zoom out

Zoom in

1/43

Technical specification

Standard DECT/GAP

Number of channels 120 duplex channels

Radio frequency range 1880 MHz to 1900 MHz

Duplex method Time-division multiplexing. 10 ms frame length

Channel spacing 1728 kHz

Bit rate 1152 kbit/s

Modulation GFSK

Voice coding 32 kbit/s

Transmitted power 10 mW, average output per channel

Range up to 300 metres outdoors (uninterrupted line

of sight)

up to 50 metres in buildings

Power supply Base station 230 V/50 Hz (AC adaptor)

Power consumption base station 3.9 VA

Operating time, mobile unit Standby: up to 60 hours

(with fully charged battery) Phone in use: Up to 6 hours

Permitted ambient conditions 0°C to 40°C

for operation (maximum) 20% to 75% rel. humidity

Permitted storage temperature –10°C to +60°C

Signalling method DTMF

Signal key function Earth Recall/Timed Break Recall

Base station dimensions 150mm x 105mm x 120mm (L x W x H)

Telephone unit dimensions 180mm x 60mm x 35mm (L x W x H)

Weight Base station: 250g

Handset: 200g (with battery)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BT Synergy 1000 in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BT Synergy 1000 Manual

Product: