1 Insert batteries
If there is a power failure and you do not have
batteries fitted, the telephone will operate
normally but the caller display function will not
work and the idle screen will go blank.
Information stored in the calls list and in the
directory will be lost.
To install the batteries, remove the stand if
fitted and open the battery cover on the
underside of your Relate 1500. You need 4
AA Alkaline batteries.
If there is a power failure
As long as batteries are installed and are in good
condition, information stored in the calls list and
directory will not be lost. When the handset is lifted
the display will show NO MAINS POWER.
If the phone is only powered by the batteries the
display will remain blank until the handset is lifted.
Please note, that if batteries only are fitted, the
screen will remain blank until the handset is lifted.
Setting up
Warning
1 Do not try to use any power supply other than
the one provided, item code 871057. If you
do, you may permanently damage your Relate
1500 which will result in non-compliance and
invalidate its approval.
2 There is a slight chance that your Relate 1500
could be damaged by an electrical storm.
We recommend that you unplug the base unit
from the mains power supply during storms.
Battery low indication
When the batteries are about two weeks away from
being exhausted the display will show BATT LOW
along the bottom of the screen. When the
batteries are fully drained, the display will show
CHANGE BATTERIES.
Battery compartment door
7
