If number is being stored as 2 touch
(M11-M20) then:
KEYPAD
Enter the number to be stored.
Press
and release the SHIFT button
and then press
and hold M1-M10 until
prompt begins.
The prompt will say
“(telephone number)
is stored in memory 11”
and display will
show
M11 stored.
11
Paragon 400 ~ 7th Edition ~ 24th May ’01 ~ 3703
Using the quickdial memory
To store a quickdial number
KEYPAD
Enter the number to be stored.
Press and hold the
M1-M10 location
you want the number stored in until
the prompt begins.
The prompt will say
“(telephone number)
is stored in memory 1”
and display will
show
MO1 stored.
You can store 20 telephone numbers, each up to
32 digits long. The first 10 are stored under the
locations M1-M10. The second 10 are stored
under the locations M11-M20 using the shift key.
Note
If you make a mistake when entering a number,
press the
DEL button to delete the last digit.
To stop the process at any time, press the
ANSWER ON/OFF button.
To make a quickdial call
HANDSET
Lift handset or press the MONITOR or
DIAL/OK button.
QUICKDIAL
Press the M1-M10 button where the
number you want is stored. The selected
number is displayed and dialled.
If using
MONITOR lift handset when
connected.
If dialling a 2 touch Quickdial number:
Press the SHIFT button and then M1-M10
and the number is dialled.
To adjust the earpiece volume
To increase the volume in the earpiece.
Display indicates the level.
To decrease the volume in the
earpiece.
