Manual BT On-Air 2100 SMS (page 8 of 35) (English)

650239

Zoom out

Zoom in

1/35

On-Air 2100 SMS user guide ~ Edition 3 ~ 29th July ’02 ~ 4641

Setting up

Please note that your handset is already

registered to the base station.

Situate your product close enough to the

telephone and mains power sockets so that the

cables will reach.

Make sure it is at least 1 metre away from other

electrical products to avoid interference.

Do not situate the product in the

bathroom or other humid areas.

Once connected, put the plinth back on the

base to prevent it from rocking on the table.

There are two positions for the plinth when

joining it to the base, both can be used for desk

mounting and one for wall mounting. Position A

is for desk mounting only and position B is for

desk or wall mounting (see wall mounting on

page 31).

Rubber feet

Hold the black plastic square between thumb

and forefinger and peel off individual feet from

backing sheet as shown. These are to stop your

base from moving and to protect your work

surface.

If you decide on position B, place 2 of the

rubber feet on the plinth and 2 on the base.

Plug the power adaptor into the wall socket and

switch on. When the power is switched on, the

button on your base will light up.

Plan the location

1 Connect the power supply and

switch on.

Thread the power supply cable and line cord

through the square hole in the plinth before

fixing to the base.

Plug the power supply cable into the socket on

the underside of your base. The power cable

connector and socket are coloured red.

WARNING

Please take care that the power supply and

telephone line cord are connected to the

correct sockets as incorrect placement could

damage your equipment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BT On-Air 2100 SMS in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BT On-Air 2100 SMS Manual

Product: