650237
16
Zoom out
Zoom in
Previous page
1/31
Next page
System Code
Your base station has a default setting of
0000
but you may want to change this to prevent
unauthorised use of the handset.
If you change your System Code keep record
of the new number by writing it in the space
provided on page 4.
Base settings
Press the UP or DOWN button until
the display shows
BASE
.
Press the OK button.
Press the DOWN button until the
display shows
PARAM
.
Press the OK button.
The display will show
F
.
Press the 3 button.
Press the 1 button.
Enter the existing code (
0000
if not
changed). As you enter each digit in
turn, the dash will stop flashing.
Four dashes will be shown on the
display. Enter your new System Code.
As you enter each digit in turn the
dash will disappear.
Enter your new System Code again.
Press the C button twice to exit.
COK
COK
To change your System Code
3
D
E
F
1
OLD
CODE
On-Air 2100 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051
COK
CONFIRM
CODE
15
NEW
CODE
Press the UP or DOWN button until
the display shows
SET
.
Press the OK button.
Press the DOWN button until the
display shows
LANGUAGE
.
Press the OK button.
Use the UP or DOWN button to select
the language you require (
English
,
German
,
Spanish
,
Italian
,
Dutch
,
Portuguese
or
French
).
Press OK to confirm.
The display will show
DONE
.
Press the C button twice to exit.
To change the display language
If you switch automatic end call ON
you can end a call by simply placing
the handset back on the base. This
means you won’t always have to press
the RED PHONE button to end a call.
Press the UP or DOWN button until
the display shows
SET
.
Press the OK button.
Press the DOWN button until the
display shows
END CALL
.
Press the OK button.
Use the UP or DOWN button to select
either
OFF
or
ON
.
Press OK to confirm.
The display will show
DONE
.
Press the C button twice to exit.
COK
COK
COK
COK
To switch automatic end call
on or off
COK
COK
COK
COK
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT On-Air 2100 Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT On-Air 2100 Classic in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info