650230

BT Hudson 1100 Manual

36
Zoom out
Zoom in
Previous page
1/47
Next page
36
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Using additional handsets
You can use up to five GAP compatible handsets with your BT
Hudson 1100 base to extend your phone system without needing
to install telephone extension sockets for each new phone.
If you have purchased a BT Hudson 1100 multiple pack any
additional handsets come pre-registered to the base.
If you have purchased a GAP compatible handset separately you
must register it to your BT Hudson 1100 base before it can be
used, following the instructions that come with the new handset.
Handset registration
If your BT Hudson handset is not already registered to any other
base, the screen will show not regiStereD preSS <Menu>
to regiSter. Just follow the instructions on the handset screen
to register the handset. If your BT Hudson handset is already
registered to another base, follow the instructions below:
Registration
At the base:
1. Press and hold
for approximately 5 seconds until you hear
a long beep. You now have 2 minutes to register the handset.
For a Hudson handset:
2. Press Menu, scroll
or
to ADvAnCeD Set and
press SeleCt.
3. Scroll
to regiStrAtion, press SeleCt.
4. Scroll to a base number, press SeleCt. Enter the system
PIN (default setting=0000) and press ok. The handset will
search for the base and then display regiStering.
When registration is complete you hear a long confirmation
beep and the handset will be allocated the next available
handset number.
If registration is not successful first
time, please repeat the process again
in case the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. The display
shows too MAny hAnDSetS.
Even if a handset is out of range
or turned off, it will still have a
registration slot allocated to it.
You must de-register another handset
before you can register the new one.
If your BT Hudson 1100 handset is
registered to more than one base, you
can select which base to use.
If you have a handset registered
to more than one base and then
de-register it from one it will
show not regiStereD . You will
need to re-register the handset to
whichever base you want to use.
Registering another make of handset
to your BT Hudson 1100 base
If you want to register another
make of handset (i.e. not a BT Hudson
1100 handset) to your BT Hudson
1100 base then you will need to
follow the base part of the registration
procedure as shown on point 1
opposite and then continue with the
Registration instructions that came
with the handset. Please note that
registering other types of handset will
only provide limited compatibility i.e.
you may only be able to make and
receive calls on the additional handset.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT Hudson 1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT Hudson 1100 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BT Hudson 1100

BT Hudson 1100 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info