To insert a pause
To use the recall button
You may need to use the RECALL
button if you are connected to a
switchboard/PBX (Private Branch
Exchange), contact your PBX supplier
for further information. The RECALL
button, when set to time break recall,
is also used for BT Select Services.
With some switchboards, after dialling
the access code you may have to wait
for a moment while the switchboard
picks up an outside line. If so, press
the
REDIAL button to insert a pause
before keying in the telephone number.
To switch from Pulse to Tone dialling
during a call
If you are connected to a pulse dialling
exchange, you can still use services
such as phone banking that require
tone dialling.
KEYPAD
Call the telephone number you require
in pulse mode as usual.
When you have been connected, press
the
✱
button on the keypad to set
your telephone to tone dialling for the
duration of the call.
When you hang up, your Freestyle 70
will automatically switch back to pulse
dialling.
To set the dialling mode
Press the QUICKDIAL button during
standby mode.
Press the
✱
button.
Press 1 for Tone dialling.
Press 2 for Pulse dialling.
Press the QUICKDIAL button to finish
the setting (you will hear a
confirmation tone).
If no instruction is received during
this process within 8 seconds, there
will be a beep and the process will
be cancelled before returning to
standby mode.
Press the PAGE button on the base
unit. The handset will ring.
Your Freestyle 70 automatically returns
to standby after approximately one
minute.
To page the handset
Please note, when the handset
ringer volume is set to OFF the
handset will not ring.
You cannot page the handset while
it is being used on a call.
An incoming call will override a
page call and the handset will ring
as normal.
11
Paging the handset
You can page the handset from the base unit to
let the handset user know they are wanted. You
cannot hold a conversation between the base
unit and the handset.
