To change the base unit ringer volume
• Press the OPTIONS button repeatedly until
the display shows
HI BASE RING. This is
your Freestyle 320 Plus’s default setting.
• Press the SELECT button to scroll through
the ringer volume options:
LO BASE RING - base rings quietly.
NO BASE RING - base does not ring.
HI BASE RING - base rings loudly.
• When the required setting is shown in the
display, press the
OPTIONS key repeatedly
until the handset gives a long beep, the
setting is stored and the display returns
to
HSET 1.
To set the dial mode
The dial mode setting of your Freestyle 320
Plus is set to
TONE which works with all
modernised exchanges. If you are on an old
exchange, set the phone to
PULSE.
• While the display shows HSET 1, press the
OPTIONS button repeatedly until display
shows
TONE.
• Press the SELECT button. The handset
display shows
PULSE.
19
How to use your
Freestyle 320 Plus
• Press the SELECT button to change between
tone and pulse.
• To exit the menu and confirm all settings
made, press the
OPTIONS button repeatedly
until the handset gives a long beep and the
display returns to
HSET 1.
To change the Recall mode for use with a
switchboard
With switchboards, you will need to set the
recall mode to Time Break (
RCL TB) or Earth
Recall (
RCL E).
• While the display shows HSET 1, press the
OPTIONS button until display shows
RCL TB or RCL E.
• Press the SELECT button to display the
correct setting for your switchboard.
• To exit the menu and confirm all settings
made, press the
OPTIONS button repeatedly
until the handset gives a long beep and the
display returns to
HSET 1.
To change the setting again, simply repeat
these steps.
If you are in doubt as to which is the correct setting
for you, contact BT free on 150.
If an incoming call arrives while you are part way
through the above procedure, your Freestyle 320
Plus will abandon the process to allow you to
answer the call. Any changes you have made will be
lost, and you will have to start again after you have
finished the call.