650299
35
Zoom out
Zoom in
Previous page
1/47
Next page
31
Telephone problems Possible cause Solution
Base unit rings too loudly / softly.
Base unit setting is too High or Low. Set the ringer setting accordingly.
Base unit does not ring but
lights show on base unit.
Telephone is not connected to the
telephone line.
The base ringer is set to off.
Line fault or faulty socket.
Plug the telephone into the telephone
socket.
Set the base ringer settings to a
higher volume.
Try the telephone on another socket
or another line. If the telephone
works, contact BT or your telephone
network operator for repairs to the
line or socket.
Neither base or handset ring,
but lights show on base and
handset.
The ringer volumes on both the
handset and base unit could be set to
minimum.
Check the REN (see page 34). If you
connect too many telephones or
devices to your line, they may not all
operate correctly.
If your telephone is connected to an
extension socket, it may have been
connected incorrectly.
Increase the ringer volume on the
base unit and handset.
If the REN exceeds 4, disconnect one
or more telephones or devices.
Check with your telephone engineer
that the extension socket has been
installed correctly.
Callers are faint.
Interference.
Buzzing.
Whooshing.
Echoing.
Tinniness.
The base unit telescopic aerial is not
extended as high as possible.
You are moving out of range.
Radio channel interference.
Radio channel interference.
The base unit or the handset are too
close to electrical equipment or metal
obstructions.
Extend the base unit telescopic aerial
as far as possible.
Move closer to the base unit.
Press the
CHANNEL button on the
handset, to select a clearer channel.
Press the
CHANNEL button on the
handset, to select a clearer channel.
Relocate the base unit or move
around with the handset until
reception improves.
Handset does not ring, but IN USE
light show on handset.
The handset ringer may be set to its
minimum setting.
Increase the handset ringer volume.
HELP
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT Freestyle 1025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT Freestyle 1025 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info