650164
27
Zoom out
Zoom in
Previous page
1/54
Next page
27
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
Handset ringing priority
1. Press Menu, scroll
to Settings and press OK.
2
. Scroll
to BS Settings. Press OK.
3
. Scroll
to Ring Priority. Press OK.
4
. All Handsets is highlighted. Press OK for all handsets to
ring together.
Or
Scroll
to Select Handset. Press OK then press
or
to select the handset you want to ring first. Press OK.
The ring delay option is highlighted. Press
or to set
the number of rings before the other handsets ring. Press OK.
5
. Press Back to return to the previous menu.
Recall mode
1. Press Menu, scroll
to Settings and press OK.
2
. Scroll
to BS Settings. Press OK.
3
. Scroll
to Recall Mode. Press OK.
4
. Press
or to select Timed Break or Earth and
press
OK.
Repeater mode
1. Press Menu, scroll
to Settings and press OK.
2. Scroll
to BS Settings. Press OK.
3. Scroll
to Repeater Mode. Press OK.
4.
Off is highlighted. Scroll to On and press OK.
5. Press
to return to the idle screen.
System PIN
1. Press Menu, scroll
to Settings and press OK.
2
. Scroll
to BS Settings. Press OK.
3
. Scroll
to System PIN. Press OK.
4
. Enter the old PIN (default setting 0000) and press OK.
5
. Enter the new PIN and press OK. Re-enter the new PIN and
press
OK. The display will show Saved.
When you have more than one
handset registered to your base, you
can set one handset to ring before
the others. This allows one handset
user to answer all incoming first, like
a receptionist.
Choose
All Handsets if you want
all handset to ring at the same time
or
Select Handset to nominate a
handset to ring before the others.
Ring delay options; 2, 4, 6 or 8 rings.
The System PIN is used when
changing certain settings and
registration / de-registration.
The default setting is 0000.
You can change this to your
own preferred 4-digit number.
If you make a mistake, press
Clear
to delete digits.
Earth and Timed Break are settings
for switchboard use. If in doubt
please contact your switchboard
service provider.
You can use a Repeater to boost the
range and reception of your base. A
Repeater must be registered with the
base and the Repeater function must
be set to
ON.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT Diverse 7410 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT Diverse 7410 Plus in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BT Diverse 7410 Plus

BT Diverse 7410 Plus Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info