• Press the OK ( ) button.
• Enter the number you want to bar,
enable or change. Press the button
to delete digits.
• Press the OK ( ) button to confirm.
• Press the RED PHONE button to
return to standby.
To switch call barring/call enabling
on and off
Once you have set the numbers you
want, you can then switch call
barring/enabling on or off at any time
(see below). You can do this from any
handset registered to the base station.
• Press the SET button.
• Press the 0 button twice.
• Press the OK ( ) button.
• Enter the base station PIN (original
setting 0000).
• Press the OK ( ) button.
• Press 1 to bar the numbers you have
stored.
3 to enable handsets to dial
only the numbers stored
0 to switch call barring/call
enabling off.
• Press the OK ( ) button to confirm.
• Press the RED PHONE button to
return to standby.
38
You can store up to five numbers as
either barred or specifically enabled
phone numbers. These can be pre-fix
numbers, eg 00 for all international
calls.
Incoming calls are not affected.
Emergency Services 999 and 112 calls
can be made at all times.
NOTE:
The barred or enabled numbers must be
switched on before you can use. See below.
Directory for barred/enabled numbers
To: Bar numbers.
Enable handsets to call only
specified numbers.
Create a memory list.
• Press the SET button.
• Press the 0 then the 1 buttons.
• Press the OK ( ) button.
• Enter the base station PIN (original
setting 0000).
• Press the OK ( ) button. Display shows
the first location.
• Press the MEMORY button if
necessary to scroll to the location you
want 1-5.